本篇将介绍Cisco ATA VoIP电话调试命令大全。
如果你使用Cisco ATA来实现你的VoIP，那么你可以通过电话的数字按键来调试你的ATA。
准备：
1. 需要有Cisco ATA并确认已经供电
2. 需要将电话连接到ATA上
命令大全：
| Action | Command | Choices | Description |
| Enter Interactive Voice Response Menu | **** | Use this command to enter the
Interactive Voice Response Menu. Do not press any other keys until you hear, “Linksys configuration menu. Please enter the option followed by the # (pound) key or hang up to exit.” |
|
| Check Internet
Connection Type |
100 | Hear the Internet connection type of the
Phone Adapter. |
|
| Check Internet IP
Address |
110 | Hear the IP address assigned to the
Phone Adapter’s Internet (external) Interface |
|
| Check Network Mask
(or Subnet Mask) |
120 | Hear the network or subnet mask
assigned to the Phone Adapter. |
|
| Check Gateway IP
Address |
130 | Hear the IP address of the Phone Adapter
(usually the network router). |
|
| Check MAC Address | 140 | Hear the MAC address of the Phone
Adapter in hexadecimal string format. |
|
| Check Firmware
Version |
150 | Hear the version number of the firmware
running on the Phone Adapter. |
|
| Check Primary DNS
Server IP Address |
160 | Hear the IP address of the primary DNS
(Domain Name Service) server. |
|
| Check Internet Web
Server Port |
170 | Hear the port number of the Internet Web
server used for the Web-based Utility. |
|
| Check Local IP
Address |
210 | Hear the local IP address of the Phone
Adapter. |
|
| Set Internet
Connection Type |
101 | DHCP – Press 0.
Static IP – Press 1. PPPoE – Press 2. |
Select the type of Internet connection
you are using. Refer to the documentation supplied by your Internet Service Provider (ISP). |
| Set Static IP Address | 111 | First, set the Internet Connection Type to
static IP address; otherwise, you will hear, “Invalid Option,” if you try to set the static IP address. Use the * (star) key when entering a decimal point. |
|
| Set Network (or
Subnet) Mask |
121 | First, set the Internet Connection Type to
static IP address; otherwise, you will hear, “Invalid Option,” if you try to set the network or subnet mask. Use the * (star) key when entering a decimal point. |
|
| Set Gateway IP
Address |
131 | First, set the Internet Connection Type to
static IP address; otherwise, you will hear, “Invalid Option,” if you try to set the gateway IP address. Use the * (star) key when entering a decimal point. |
|
| Set Primary DNS
Server IP Address |
161 | First, set the Internet Connection Type to
static IP address; otherwise, you will hear, “Invalid Option,” if you try to set the IP address of the primary DNS server. Use the * (star) key when entering a decimal point. |
|
| Set the Mode | 201 | Router/NAT
Mode – Press 0. Bridge/Switch Mode – Press 1. |
If the Phone Adapter acts as the router
for your network, use the router/NAT mode. If your network already has a router, use the bridge/switch mode. |
| Enable/Disable WAN
Access to the Web-based Utility |
7932 | Enable –
Press 1. Disable – Press 0. |
Use this setting to enable or disable WAN
access to the Web-based Utility. (This Utility lets you configure the Phone Adapter.) |
| Manual Reboot | 732668 | After you hear, “Option successful,” hang
up the phone. The Phone Adapter will automatically reboot. |
|
| Factory Reset | 73738 | Confirm –
Press 1. Cancel – Press * (star). |
This feature may be protected by a
password available only from your ITSP. If necessary, enter the password*. The Phone Adapter will request confirmation; enter 1 to confirm. You will hear, “Option successful.” Hang up the phone. The Phone Adapter will reboot, and all settings will be reset to their defaults |
| User Factory Reset | 877778 | Confirm –
Press 1. Cancel – Press * (star). |
The Phone Adapter will request
confirmation; enter 1 to confirm. You will hear, “Option successful.” Hang up the phone. The Phone Adapter will reboot and all user-configurable settings will be reset to their factory default settings. |
按键规则：
• A, B, C, a, b, or c — press 2.
• D, E, F, d, e, or f — press 3.
• G, H, I, g, h, or i — press 4.
• J, K, L, j, k, or l — press 5.
• M, N, O, m, n, or o — press 6.
• P, Q, R, S, o, q, r, or s — press 7.
• T, U, V, t, u, or v — press 8.
• W, X, Y, Z, w, x, y, or z — press 9.
• All Other Characters — press 0.
举例：
to enter the password phone@321 by keypad, press these keys:
746630321. Then press the #(pound) key to indicate that you have finished entering the password. To cancel your entry and return to the main menu, press * (star).
